EXAMPLE: To replace a 17.5 + 5 microfarad Dual-Value Capacitor:
BEFORE YOU START: Make note of the wires which are attached to the fan
motor (F), common (C), and compressor (Herm) terminals of the capacitor
STEP 1: To achieve the 17.5 microfarad for the compressor (HERM) - Using two (2) jumper wires, (a) connect the 5 (6) + 2.5 (3.0), then (b) connect the 2.5 (3.0) + 10. This will equal 17.5 microfarads. STEP 2: Connect
one of the wires from the compressor to the 10 MFD terminal.
STEP 3: Connect the other wire(s) from the compressor to the common (C).
[The common is the center black terminal].
STEP 3: Connect one of the fan wires to the 5 (4) MFD terminal.
STEP 4: Connect the other wire from the fan motor to the common (C). [The
common is the center black terminal].